The master code allows you to do quite a few things on the alarm system. You can arm and disarm the system and any partition on the system if you are using multiple partitions. You will want to change this to a code that only you know so that someone does not break in and just try to enter to disarm the system.
This would make your alarm system much less effective against a break in. The default installer code for a DSC is The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. Having the installer code is the most important part of setting up the system. You will not be able to arm or disarm with the system with the installer code.
But if you have the installer code you can make any changes you want to the system, including changing the master code. The installer code, like the master code should ideally be changed to a number that is not easy to guess. This PDF document can help you navigate the issue you are having with your panel and help you to DIY solver your problem.
Light 1 - Service Required - Press the 1 key for more info. If the number 1 light stays on, it means the Main panel battery needs to be swapped out. This represents what zone number is in fault. Once you figure out what zone it's coming from, all you should have to do is replace the battery.
Did you find it helpful? Yes No. Home Solutions. Enter your search term here Login to submit a new ticket. Check ticket status. Sorry we couldn't be helpful. Help us improve this article with your feedback.
Related Articles. Customer Info. Tech Support.
0コメント